John P. Coulter

Coulter, J.P. and Yalcintas, M. "Electrorheological Material Based Non-Homogeneous Adaptive Beams," Journal of Smart Materials and Structures, Vol. 7, pp. 128-143, 1998.

Coulter, J.P., Tom, A.M. and Kikuchi, A. "An Experimental Evaluation of Vibration-Assisted Injection Molding During Manufacturing," Journal of Materials Processing and Manufacturing Science, Vol. 8, No. 2, pp. 141-153, 1999.

Coulter, J.P, Ilegbusi, O.J. and Oyeleye, G. (eds.) The Science, Automation and Control of Material Processes Involving Coupled Transport and Rheology Changes, MD-Vol. 89, New York: The American Society of Mechanical Engineers, 114 pp, 1999.

Coulter, J.P. and Kikuchi, A. "Improved Processing of New and Recycled Material Blends Through Vibration-Assisted Injection Molding," Journal of Materials Processing and Manufacturing Science, Vol. 8, No. 3, pp. 1-17, 2000.

Coulter, J.P. and Kikuchi, A. "Vibration-Assisted Injection Molding Applied to Recycled General Purpose Polystyrene," in ANTEC 2001 - Proceedings of the 59th Annual Technical Conference & Exhibition, Volume XLVII, Dallas, TX, May 6-10. The Society of Plastics Engineers, New York, pp. 2791-2795, 2001.

Coulter, J.P. and Hallowell, D.J. "Welding Strength in Products Manufactured through Vibration-Assisted Injection Molding," in ANTEC 2001 - Proceedings of the 59th Annual Technical Conference & Exhibition, Volume XLVII, Dallas, TX, May 6-10. The Society of Plastics Engineers, New York, pp. 498-501, 2001.

Coulter, J.P. and Angstadt, D.C. "The Development of Geometry and Polymer-Independent Product Quality Models Based on Injection Modling Cavity Pressure," in ANTEC 2001 - Proceedings of the 59th Annual Technical Conference & Exhibition, Volume XLVII, Dallas, TX, May 6-10. The Society of Plastics Engineers, New York, pp. 537-542, 2001.

Coulter, J.P., Nied, H.F. and Cirucci, L. "Customer Focused Undergraduate Manufacturing Education Incorporating Middle School Students," in Proceedings of the 2001 ASME International Mechanical Engineering Congress and Exposition, New York, NY, November 11-16, The American Society of Mechanical Engineers, pp./educate/awards 1-4, 2001.

Coulter, J.P. and Kikuchi, A., and Angstadt, D.C. "Polymer Melt Manipulation and In-Process Morphology Control During Modling Processes:  A Review," Journal of Injection Molding Technology, Volume 6, Number 2, pp. 91-106, 2002.

Coulter, J.P. and Kikuchi, A. "Comparison of Effects of Vibration-Assisted Injection Molding on Polystyrene and Polycarbonate," in ANTEC 2002 - Proceedings of the 60th Annual Technical Conference & Exhibition, Volume XLVIII, San Francisco, CA, May 5-9, 2002. The Society of Plastic Engineers, New York, pp. 108/1-108/5, 2002.

Coulter, J.P. and Hallowell, D.J. "Increased Shear Through Weldlines Using Controllable Compliance Accumulator," in ANTEC 2002 - Proceedings of the 60th Annual Technical Conference & Exhibition, Volume XLVIII, San Francisco, CA, May 5-9, 2002. The Society of Plastic Engineers, New York, pp. 369/1-369/5, 2002.

Coulter, J.P. and Rungroungdouyboon, B. "A Numerical Simulation of Non-Homogeneous Sheet Heating During Thermoforming Processes," in Proceedings of the 10th JSME/ASME International Conference on Materials and Processing, Honolulu, Hawaii, October 15-18, 2002, pp. 385-390, 2002.

Coulter, J.P., Skibitsky, T.G., and Misiolek, W.Z., "The Science-Based Optimization of Multi-Stage Cold Forging Processes," in Proceedings of the 0th JSME/ASME International Conference on Materials and Processing, Honolulu, Hawaii, October 15-18, 2002, pp. 385-390, 2002.

Coulter, J.P., Silebi, C.A., Bennett, C.A. and McLaine, P.Q., "An Investigation of Electrostatic Water Treatment for Industrial Systems," in Proceedings of the 63rd Annual International Water Conference, Pittsburgh, PA, October 20-24, pp. 48/1-48/11, 2002.

Coulter, J.P. and Angstadt, D.C., "Product Strength and Orientation Manipulation via Vibration Assisted Injection Molding," in Proceedings of IMECE 2002, ASME International Mechanical Engineering Congress and Exposition, New Orleans, Louisiana, November 17-22, pp. 33928/1-33928/6, 2002.

Coulter, J.P. and Rungroungdouyboon, B. "The Development and Validation of a Numerical Model for Non-Homogeneous Sheet Heating During Thermoforming Processes," in Proceedings of IMECE 2002, ASME International Mechanical Engineering Congress and Exposition, New Orleans, Louisiana, November 17-22, pp. 32653/1-32653/8, 2002.

Coulter, J.P. and Tom, A.M., "Advancements in Micro-Molding for Small-Scale Product Fabrication," In Proceedings of IMECE 2002, ASME International Mechanical Engineering Congress and Exposition, New Orleans, Louisiana, November 17-22, pp. 33945/1-33945/9, 2002.

Rungroungdouyboon, B. and Coulter, J.P., “The Science Based Optimization of Material Heating During Thermoforming Processes,” ANTEC 2003 – Proceedings of the 61st Annual Technical Conference and Exhibition, Vol. XLIX, Nashville, TN, May 4-8, Society of Plastics Engineers, pp. 780-784, 2003.

Coulter, J.P., Nied, H.F., Smith, C.R., Angstadt, D.C., Cirucci, L., and Santoro, J., “Involving Middle School Students in Customer Focused Undergraduate Manufacturing Education,” Proceedings of the 2003 American Society for Engineering Education Annual Conference and Exposition, Nashville, TN, June 20-23, American Society for Engineering Education, pp. 2560/1-2560/4, 2003.

Layser, G.A., Pinarbasi, A., and Coulter, J.P., “Numerical Simulation of a Multi-Cavity Mold Utilizing Cavity Specific Control of Melt Flow During Injection Molding Processes,” Proceedings of R3MEMCON – 2003 Annual Conference of East Coast Region 3 of the Society of Manufacturing Engineers, Bethlehem, PA, October 10-11, 2003, Society of Manufacturing Engineers, Washington, DC, 2003.

Coulter, J.P., “Cavity Specific Control of Melt Flow During Injection Molding Processes,” Proceedings of the 2003 ASME International Mechanical Engineering Congress, Washington, DC, November 15-21, American Society of Mechanical Engineers, pp. 55360/1-55360/12, 2003.

Pinarbasi, A., Layser, G.A., and Coulter, J.P., “Numerical Simulation of Polymer Melt Flow Control for a Multi-Cavity Mold During Injection Molding Processes,” Proceedings of the 2003 ASME International Mechanical Engineering Congress, Washington, DC, November 15-21, American Society of Mechanical Engineers, pp. 55409/1-55409/9, 2003.

Gomatam, R.R., and Coulter, J.P., “Numerical Simulation of Underfill Cure Evolution in Chip-Scale Package (CSP) Manufacturing Process,” Proceedings of the 36th International Symposium on Microelectronics – IMAPS 2003, Boston, Massachusetts, November 16-20, 2003, International Microelectronic Packaging Society, Washington, DC, pp. TH27/1-TH27/6.

Coulter, J.P., Pearson, R.A., and Angstadt, D.C., “Active Manipulation of a Polymer Melt During Injection Molding Processing,” Proceedings of the 2003 NSF Design and Manufacturing Division Grantees Conference, Birmingham, AL, January 4-8,2003, National Science Foundation, Washington, DC, pp. DMI-0218182/1-3, 2003.